Multimedia Modem v1.00 -> v1.02 upgrade changes:
***********************************************************************
NOTE: This is an upgrade to the previous text file for CSDV102.
The information is the same, but the instructions have been rewritten
so that they are easier to understand.
***********************************************************************
To install the files in this CSD, do the following:
1. Create a directory on your hard disk called CSD.
Type "MKDIR CSD".
2. Change to the CSD directory.
Type "CD CSD".
3. Unzip the CSDV102.ZIP file.
Type "PKUNZIP -D x:CSDV102.ZIP", where x is the location of the
CSDV102.ZIP file.
4. Type "DIR". The list of files you see should appears as follows:
. <DIR> 5-22-95 5:32p
.. <DIR> 5-22-95 5:32p
DOS <DIR> 6-02-95 3:26p
MMPMV211 <DIR> 6-02-95 3:26p
MMPMWARP <DIR> 6-02-95 3:26p
OS2 <DIR> 6-02-95 3:26p
WINDOWS <DIR> 6-02-95 3:26p
5. Install the fixes listed below. Each item below explains a fix
that was made and then explains how to install the fix.
WINDOWS FIXES
-------------
1. The Windows setup program, which runs during installation, has been
improved as follows:
- OS/2 Warp Fullpack support added.
- Improved Mwave Disk Space detection.
- Improved Uninstall of Mwave on systems using QEMM and other Memory
Managers.
- Installs correctly on machines that have Windows on a different
drive than DOS.
- Improved uninstall...v1.00 left an empty [mwgames.drv] section.
- Product section added to the MWAVE.INI file
[Product]
Name = Multimedia Modem
Version= 1.02
To install the fixes:
A. Go to the directory where the fixes are located. Type "CD
C:\CSD\WINDOWS". CSD is the subdirectory created above, where
you unzipped the CSD file.
B. Place the Mwave for Windows Disk 1 into the diskette drive.
C. Create back up copies of the old files. Type:
"RENAME A:SETUP.INS SETUP.BAK"
"RENAME A:~INS0762.LIB ~INS0762.BAK"
D. Copy the new files onto your diskette. Type:
"COPY SETUP.INS A:"
"COPY ~INS0762.LIB A:"
2. The full duplex speaker phone has been improved as follows:
- Little or no feedback from the microphone through the speakers with
this file.
- "Wave" noises are no longer present during speaker phone
conversations.
- Sound quality of speaker phone is improved.
To install the fix:
A. Create back up copies of the old file. Type:
"CD C:\DSP2\MWW\FAXTAM"
"RENAME SPK07DX.DSP SPK07DX.BAK"
B. Copy the new file onto your system. Type:
"COPY C:\CSD\WINDOWS\SPK07DX.DSP"
3. The "Manager" application has been improved as follows:
- Gives improved Rapid Resume functionality.
- Allows for CD sound through the speakers ONLY if AUX=CD.
- Improved volume control on the audio control panel.
To install the fix:
A. Create back up copies of the old file. Type:
"CD C:\DSP2\MWW\MANAGER"
"RENAME MEIOSLWW.DRV MEIOSLWW.BAK"
B. Copy the new file onto your system. Type:
"COPY C:\CSD\WINDOWS\MEIOSLWW.DRV"
4. The configuration program has been improved as follows:
- COM IRQ and CD BASE ADDRESS problems fixed.
- Copyright changed to 1995
- NEW OBI default setting for the board.
To install the fix:
A. Create back up copies of the old file. Type:
"CD C:\DSP2\SOHO"
"RENAME CONFIGW.EXE CONFIGW.BAK"
B. Copy the new file onto your diskette. Type:
"COPY C:\CSD\WINDOWS\CONFIGW.EXE"
DOS FIXES
---------
1. DOS installation has been corrected so that "MWGAMES ON" is the
default in your autoexec.bat after installing the Multimedia
Modem software.
To install the fixes:
A. Go to the directory where the fixes are located. Type "CD
C:\CSD\DOS". CSD is the subdirectory created above, where
you unzipped the CSD file.
B. Place the Mwave for DOS Disk 1 into the diskette drive.
C. Create back up copies of the old file. Type:
"RENAME A:INSTALL.EXE INSTALL.BAK"
D. Copy the new file onto your diskette. Type:
"COPY INSTALL.EXE A:"
OS/2 FIXES
----------
1. The OS/2 Setup program, which runs during OS/2 installation, has
been improved as follows:
- Bug fixes for Uninstall - remove Mwave Audio driver for OS/2
V2.11 from CONFIG.SYS.
- Product section added to the MWAVE.INI file
[Product]
Name = Multimedia Modem
Version= 1.02
- Checks appropriate min. disk space required to install Mwave
for OS/2.
- setup.ins allows for variable destination directory name.
- Fixed problem where system beeps during Mwave OS/2 installation.
- Added product name and default directory name for OS/2 install.
These values are required by setup.ins to perform the
installation appropriately .
To install the fixes:
A. Go to the directory where the fixes are located. Type "CD
C:\CSD\OS2". CSD is the subdirectory created above, where
you unzipped the CSD file.
B. Place the Mwave for OS/2 Disk 1 into the diskette drive.
C. Create back up copies of the old files. Type:
"RENAME A:SETUP.INS SETUP.BAK"
"RENAME A:INSTALL.CMP INSTALL.BAK"
D. Copy the new files onto your diskette. Type:
"COPY SETUP.INS A:"
"COPY INSTALL.CMP A:"
2. The full duplex speaker phone has been improved as follows:
- Little or no feedback from the microphone through the speakers with
this file.
- "Wave" noises are no longer present during speaker phone
conversations.
- Sound quality of speaker phone is improved.
To install the fix:
A. Create back up copies of the old file. Type:
"CD C:\DSP2\MWOS2\DSP"
"RENAME SPK07DX.DSP SPK07DX.BAK"
B. Copy the new file onto your system. Type:
"COPY C:\CSD\OS2\SPK07DX.DSP"
3. The OS/2 configuration program has been improved as follows:
- Copyright changed to 1995
- NEW OBI default setting for the board.
- the "CD-ROM Type" setting can now be stored.
To install the fixes:
A. Create back up copies of the old files. Type:
"CD C:\DSP2\MWOS2\BIN"
"RENAME CONFIGO.EXE CONFIGO.BAK"
"RENAME MWBD0700.SYS MWBD0700.BAK"
B. Copy the new files onto your system. Type:
"COPY C:\CSD\OS2\CONFIGO.EXE"
"COPY C:\CSD\OS2\MWBD0700.SYS"
4. The audio installation has been improved as follows:
- Auxiliary Control icon is created first before executing
MINSTALL.EXE.
To install the fixes:
FOR WARP USERS:
A. Go to the directory where the fixes are located. Type "CD
C:\CSD\MMPMWARP". CSD is the subdirectory created above, where
you unzipped the CSD file.
B. Place the OS/2 WARP Audio Disk 1 into the diskette drive.
C. Create back up copies of the old file. Type:
"RENAME A:SETUP.CMD SETUP.BAK"
D. Copy the new files onto your diskette. Type:
"COPY SETUP.CMD A:"
FOR OS/2 2.11 USERS:
A. Go to the directory where the fixes are located. Type "CD
C:\CSD\MMPMV211". CSD is the subdirectory created above, where
you unzipped the CSD file.
B. Place the OS/2 V2.11 Audio Disk 1 into the diskette drive.
C. Create back up copies of the old file. Type:
"RENAME A:SETUP.CMD SETUP.BAK"
D. Copy the new files onto your diskette. Type:
"COPY SETUP.CMD A:"