October 28, 1998
IBM ThinkPad 380Z
System Program Service Diskette

Version 1.01
========================================================================


What This Diskette Does
-----------------------

The System Program Service Diskette given here can update the system
program stored in the ThinkPad system to fix problems, add new functions,
or expand functions. The supported model is as follows.

   - ThinkPad 380Z


To determine if you have to update the system program or not, please
refer to the "Summary of Change" section.

To update the system program, please refer to the "Updating System
Program" section.


Released Version
----------------

Version 1.01     - A Correction for Problem
Version 1.00     (Initial Release)
                 - Correction for Problems


Summary of Change
-----------------

 Key: <n.nn>  Diskette Version (for example, 1.04 means Version 1.04)
      (New)   New Function or Enhancement
      (Fix)   Correction to existing function


<1.01>
 - (Fix) The System Program update can't be done with the following
         error messages if the TrackPoint is disabled.
         - Run-time error R6003
         - Integer divided by 0
   Note: This diskette (Version 1.01) has the same level of System
         Program (BIOS) as the previous level of diskette (Version 1.00)
         has.  So you don't need to update the System Program again with
         this System Program Service Diskette if you could do that with
         the Version 1.00 successfully.

<1.00>
 - (Fix) Password can not be input when the system goes into standby
         mode (rather than suspend) by the suspend timer function when
         attached to a Port Replicator.         
 - (Fix) (Windows 98 only) The Windows screen appears when the system
         resumes to operation mode from the standby mode, if 'resume on
         incoming call' or 'scheduled tasks' is enabled.
         (This is out of Windows 98's design.)
 - (Fix) (Windows 95 only) The system may hang during Windows 95
         installation under some conditions.
 - (Fix) UUID (Universally Unique ID) should be displayed as lower case
         characters.


Updating System Program
-----------------------

To determine if you have to update the system program or not, please
refer to the "Summary of Change" section.

Notes: - You need an AC adapter and a charged battery pack to update
         the system program.

       - If your computer is attached to any kinds of Port Replicator,
         turn off the computer and detach it before proceeding.

1.  Print these instructions or display on another computer.
2.  Firmly connect the AC adapter to the computer.
3.  Insert the System Program Service Diskette into the diskette drive
    and turn on the computer.
4.  Select "Read this first..." from the menu and carefully read the
    information that appears.
5.  Press the Esc key to return to the menu.
6.  Select "Update system program" and follow the instruction on
    the screen.

    Warning: Do not turn off or suspend the computer until the update
             has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER
             WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY
             HAVE TO BE REPLACED.

After the update has been completed, run the diagnostics to make sure
that the computer runs with no errors:

7.  Make sure the System Program Service Diskette is removed from
    the diskette drive, then turn off the computer.
8.  Press and hold the F1 key, then turn on the computer. Hold the F1
    key until the Easy-Setup menu appears.
9.  If a password prompt appears, type the correct password.
10. Select Test, then select Start to run all the basic tests.
    Various test patterns will appear on the screen.
    An OK will appear for each device that passes the test.
11. Verify that OK appears for all of the devices tested.
12. Press the Esc key to exit Test and turn off the computer.


System Program Information
--------------------------

Each version of the System Program Service Diskette contains the
following system program (BIOS). The BIOS P/N, BIOS Date and the
BIOS version can be viewed by invoking Easy-Setup.

  Diskette    Diskette
  Version     Name        BIOS P/N    BIOS Date    BIOS Version
  --------    --------    --------    ---------    ------------
  1.00        IGUJ01US    97H4141     09/11/98     IGET23WW
  1.01        IGUJ02US    (ditto)     (ditto)      (ditto)


Service Information
-------------------

The System Program Service diskette installs System Program as follows.


                                              Reserved    Usable
  ThinkPad Model        BIOS P/N   Date       BIOS Area*  BIOS ROM Area*
  ----------------------------------------------------------------------
  380Z                  97H4141    09/11/98   C000-CBFF   E000-EFFF
                                              F000-FFFF

  * NOTE: - Memory Range C000-CBFF is reserved for Video BIOS.
          - Memory Range E000-EFFF can be used as UMB (Upper Memory
            Block) by a memory manager such as EMM386.EXE.
          - Memory Range F000-FFFF is reserved for BIOS.

The BIOS P/N and the date can be viewed by invoking Easy-Setup menu.


Trademarks
----------

  * IBM and ThinkPad are registered trademarks of IBM Corporation.
  * Windows is a registered trademark of Microsoft Corporation.

  Other company, product, and service names may be registered trademarks,
  trademarks or service marks of others.