Darklands Roland + DMA workaround

For those of you with both Roland and DMA-equipped sound cards, here is a
workaround for Darklands, so you can get Roland Music and DMA digital
effects in the opening and closing animations. Its almost too simple, and
we apologize for not having thought of it sooner.

The drivers that would be used on your DMA-equipped sound card should be
replaced by the Roland drivers, and then you choose the non-Roland sound
card in the install procedure, making sure your DMA parameters are set
correctly. DMA-equipped boards use one of two drivers as follows:

        ASOUND.DL?                      PSOUND.DL? (YM262/OLP3-based)
        -------------------------       ------------------------------
        Covox Sound Master II           Pro Audio Spectrum +/16
        Original Sound Blaster          new Sound Blaster Pro
        Original Sound Blaster Pro
        Original Pro Audio Spectrum
        Thunderboard
        ATI F/X


For example, Pro Audio Spectrum 16 owners will do the following:

    REN  PSOUND.DLC PSOUND.DC
    REN  PSOUND.DLB PSOUND.DB
    COPY RSOUND.DLC PSOUND.DLC
    COPY RSOUND.DLB PSOUND.DLB

and then select Pro Audio Spectrum 16 in the install program, setting the
appropriate DMA channel and interrupt values.

Enjoy!