IBM ARTIC960
Support for OS/2
Version 1.2.2
TABLE OF CONTENTS
-----------------
1. Product Specifications
- Overview
- ARTIC Adapters Supported
- Software Requirements
- Storage Requirements
- Latest Software Updates
- Related Publications
2. Download the Package File to the Target System
3. Components of the Downloaded File
4. Product Installation
5. Version History
6. Support Information
7. Notices
8. Trademark List
1. Product Specifications
Overview
--------
The IBM ARTIC960 Support for OS/2, Version 1.2.2, contains the
following:
- Install/Update files
- Realtime kernel and its supplied subsystems
- Realtime debug kernel
- ARTIC960 Trace facility support
- Driver and subsystem modules to support OS/2
For: ARTIC960 MCA, ARTIC960 PCI, ARTIC960Rx PCI, ARTIC960Hx PCI,
and ARTIC960Rx Frame Realy PCI adapters
- Diagnostics
For: ARTIC960Rx/Hx PCI PMC Bus 4-Port and PMC T1/E1 and
ARTIC960Rx Frame Relay PCI PMC Bus 2-Port and
ARTIC960 MCA/PCI CFE Bus 4-Port and 8-Port daughter boards
- ARTIC960 PMC Bus support
- ARTIC960 STREAMS subsystem support
- ARTIC960 Cross-Bus support
ARTIC Adapters Supported
------------------------
- IBM ARTIC960 MCA Co-Processor
- IBM ARTIC960 PCI Co-Processor
- IBM ARTIC960Rx PCI Adapter
- IBM ARTIC960Hx PCI Adapter
- IBM ARTIC960Rx Frame Relay PCI Adapter
Software Requirements
---------------------
- IBM Operating System/2, OS/2 Warp (Version 4.0)
- IBM Operating System/2, OS/2 Warp (Version 3.0)
- IBM Operating System/2, OS/2 Warp Connect (Version 3.0)
- IBM Operating System/2, OS/2 SMP (Version 3.0)
Storage Requirements
--------------------
- System Unit - ARTIC960 Support for OS/2 (file system requires 2.0 MB)
- On-Card - Approximately 600 KB of on-card memory space is required
to load the kernel and the supplied subsystem files onto the
adapter. This estimate assumes the use of configuration defaults
and two adapters configured for peer-to-peer communications.
Depending on your particular configuration, the 600 KB estimate may
increase or decrease.
In addition to the on-card storage stated, sufficient memory space
must be available on the co-processor adapter to run your application.
Latest Software Updates
-----------------------
- The latest software updates can be downloaded from the Web at:
http://www.radisys.com/products/artic/ibm/
Related Publications
--------------------
- IBM ARTIC960 MCA Guide to Operations
- IBM ARTIC960 PCI Guide to Operations
- IBM ARTIC960Rx PCI Adapter Guide to Operations
- IBM ARTIC960Hx PCI Adapter Guide to Operations
- IBM ARTIC960Rx Frame Relay PCI Adapter Guide to Operations
Publications can be obtained from the Web at:
http://www.radisys.com/products/artic/ibm/
2. Download the Package File to the Target System
a. Download the self-extracting file 9OS122O.EXE to a temporary
subdirectory.
b. Uncompress the package file by typing:
9OS122O x
(where x is the temporary directory)
3. Components of the Downloaded File
README.1ST Read me first
LICENSE.ADD License Agreement
LICENSE.PLA Program License Agreement
R9OS122O.TXT Product information
I9OS122O.TXT Installation instructions
RUN_READ.ME File describing the files in this image
INST_RUN.CMD Run-Time Package Installation Program
KERNLD0.CFG Configuration file for loading card 0
KERNLD1.CFG Configuration file for loading card 1
KERNLDS.CFG Configuration file for loading card 0 and card 1
KDEVLD0.CFG Configuration file for loading card 0 (Development Kernel)
KDEVLD1.CFG Configuration file for loading card 1 (Development Kernel)
KDEVLDS.CFG Configuration file for loading cards 0 and 1 (Development Kernel)
RIC.MSG Message file
RICCNFG.EXE Configuration utility
RICDUMP.EXE Dump utility
RICH.MSG Help message file
RICINIT.CMD Initialization command file
RICINITD.CMD Initialization command file (uses Development Kernel)
RICIO16.SYS OS/2 device driver
RICIO32.DLL OS/2 dynamic link routines
RICLOAD.EXE Application loader utility
RICMBX.CFG Mailbox configuration file
RICMBX32.DLL OS/2 dynamic link routines
RICMBX32.EXE Mailbox process
RICRESET.EXE Reset utility
RICROMUP.EXE ROM update utility
RICRTASK.REL ROM update utility support
RICSTAT.EXE Status utility
RICDIAG.EXE Diagnostic utility
JDC2.REL Diagnostic Control (PMC Cards)
JDC.DGX Diagnostic Control (CFE Cards)
AIB10010.DGX CFE Bus 4-Port Diagnostics
AIB10020.DGX CFE Bus 8-Port Diagnostics
P0871014.DGR PMC Bus 4-Port Diagnostics
P0F81014.DGR PMC Bus 2-Port Diagnostics
P0B91014.DGR PMC Bus T1/E1 Diagnostics
RIC_BASE.REL Base device driver
RIC_KERN.REL Kernel
RIC_KDEV.REL Development Kernel
RIC_MCIO.REL System Bus I/O subsystem
RIC_SCB.REL Subsystem Control Block subsystem
RIC_PCI.REL On-Card PMC Bus Driver
RIC_OSS.REL On-card STREAMS subsystem
RIC_ESS.REL Cross-Bus driver
RICCLASS.TRC Trace utility classes
RICFMTTR.EXE Trace format utility
RICGETTR.EXE Get trace utility
RICSETTR.EXE Set trace utility
SYSLEVEL.JUN Operating System/2 syslevel file
4. Product Installation
See the installation instructions in file I9OS122O.TXT.
5. Version History
1.2.2 - Support for the IBM ARTIC960Rx Frame Relay PCI Adapter
1.2.1 - General fixes and performance enhancements
- Cross-Bus support and diagnostics
- Support for the ARTIC960Rx PCI Adapter running in an IBM
Industrial Computer Model 7588 (7588RP.SYS) available
through the IBM ARTIC Developer's Assistance Program (DAP)
(call 1-561-443-7984).
1.2.0 - ARTIC960 Support for OS/2 requires OS/2 Version 3.x or later.
- Provides support for ARTIC960Rx PCI and ARTIC960Hx PCI adapters
- Provides support for PMC daughter cards
- Provides new performance enhancement options
- Provides two versions of the ARTIC960 kernel (run time and
development)
1.1.1 - Provides ARTIC960 Data Cache support
- Provides On-card STREAMS support
6. Support Information
IBM ARTIC Technical Support Desk (USA and Canada): call 1-800-237-5511
and at the Voice Response Unit enter "0" (ignore all other options).
IBM ARTIC Technical Support Desk for all other locations, call your
IBM country specialists.
7. Notices
This information was developed for products and services offered in
the U.S.A. IBM may not offer the products, services, or features
discussed in this document in other countries. Consult your local
IBM representative for information on the products and services
currently available in your area. Any reference to an IBM product,
program, or service is not intended to state or imply that only that
IBM product, program, or service may be used. Any functionally
equivalent product, program, or service that does not infringe any
IBM intellectual property right may be used instead. However, it is
the user's responsibility to evaluate and verify the operation of any
non-IBM product, program, or service.
IBM may have patents or pending patent applications covering
subject matter described in this document. The furnishing of this
document does not give you any license to these patents. You can
send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
8. Trademark List
The following terms are trademarks of the IBM Corporation in the United
States or other countries, or both:
IBM Micro Channel
PS/2 Personal System/2
OS/2 Operating System/2
AIX RISC System/6000
C Set ++ Macro Assembler/2
Portmaster Proprinter
IBM VisualAge C++
Other company, product, and service names may be trademarks or service
marks of others.
C-bus is a trademark of Corollary, Inc. in the United States, other countries,
or both.
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States, other
countries, or both.
Microsoft, Windows, Windows NT, and the Windows logo are trademarks
of Microsoft Corporation in the United States, other countries,
or both.
PC Direct is a trademark of Ziff Communications Company in the United
States, other countries, or both and is used by IBM Corporation
under license.
ActionMedia, LANDesk, MMX, Pentium, and ProShare are trademarks of Intel
Corporation in the United States, other countries, or both. (For a
complete list of Intel trademarks, see www.intel.com/tradmarx.htm)
UNIX is a registered trademark in the United States, other countries,
or both and is licensed exclusively through X/Open Company Limited.
SET and the SET Logo are trademarks owned by SET Secure Electronic
Transaction LLC. (For further information, see www.setco.org/aboutmark.html)