CPC091792

                    The Complete Communicator
                   Using Crosstalk Mk.4 v1.01
                                
                                
This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

From the Initial Menu:

Choose "Change your equipment setup (Config)".  Follow directions
through "Enter Port No."  Set port to Com 1 or Com 2.

  Select "2400 Baud"
  Select "Hayes Modems All Models"
  Select "Genuine Hayes Smartmodem 2400 or 2400B"

Choose "Add or Change a Phone Book card (NewCall)"

  Select "Change Information on an old card"
  Name
  Description
  Number
  "Enter Information for new card"
  Name
  Description
  Number

When done select "Device Review"

Port                  1 or 2
Speed                 2400
Data                  8
Parity                None
Stop Bits             1
Dial Prefix           ATDT
Dial Suffix           |  (This is a pipe symbol, usually a
Modem Init            Shift Backslash)
Anwser Setup          ATE1V1X4Q0&C1&D2|~
                      ATV1S0=1|

When done select "Terminal Review"

Newline                           On
                    Using Crosstalk XVI v3.61
                                
                                
From Initial Menu:

Speed (Baud Rate)        2400
Data (Data Bits)         8
Port (Comm Port)       1 or 2
Parity                   None
Stop Bits                1
Duplex                   Half
Emulate Terminal         None
Mode (Answer, Direct,    Call
or Call                ATE1V1X4Q0|~ATDT  (|=Shift
DPrefix                     Backslash)
DSuffix                  |
APrefix                  ATS0=1|