SVGA Windows  (250-4055)           Installation         Faxback Doc. # 2179
Accelerator Adapter

Install the adapter in any available 16-bit expansion slot. To install the
adapter:

1. Disconnect the computer from the AC outlet. Disconnect all peripheral
   equipment, and open the computer.
2. Remove the screw from a slot cover at the back of the computer. Remove
   the slot cover.
3. Hold the adapter by the top corners, and align the edge connectors with
   the expansion slot. Then, press down on the adapter to seat it firmly in
   the expansion slot.
4. Secure the adapter, using the screw you previously from the slot cover.
5. Close the computer, and reconnect all peripheral equipment. Plug in the
   computer.

Note: Refer to your computer user's guide if you need more information.

Note: You will need the following materials:

* Medium flat-blade screwdriver
* Medium Phillips screwdriver
* Computer user's guide
* Monitor documentation and specifications
* MS-DOS User's Guide and Reference
* Software applications and accompanying documentation
* Blank, formatted diskettes for creating working copies of the three
  drivers diskettes packaged with the adapter

CAUTION: Static electricity can destroy integrated circuits. Discharge any
built-up static electricity by touching a grounded metal object before
handling the adapter or touching any components on the main logic board of
the computer.

Preparing the Computer:

Turn off the computer. Disconnect the power cord and all cables from the
back of the computer. Remove the computer cover as directed in your computer
user's guide.

Note: If your computer has on-board VGA circuitry, you must disable this
circuitry before installing the SVGA Windows Accelerator Adapter. Refer to
your computer user's guide for instructions on disabling the on-board
circuitry.