SENSATION!  (250-1650)         Sound Options           Faxback Doc. # 2631


Sound Options - Current Sound Compatibility

The sound chip set that came with the Sensation! is listed as Adlib
compatible from DOS.

Sound Blaster Compatible (from Windows, providing the TANDY VIRTUAL DSP
DRIVER is installed in the installed drivers list.)  To get the DOS-based
programs to see the Sound Blaster, you must install the Tandy Virtual DSP
Driver. 

1.   From the Program Manager, double click on the Control Panel icon, then
     double click on the drivers icon.

Now you should see the installed drivers list.

2.   Click on "Add" and choose the "TANDY VIRTUAL DSP DRIVER".

3.   Once this driver is highlighted, click on "Ok". 

4.   The screen will prompt you to press "Enter" to use the driver that is 
     already on the hard drive.

After you press "Enter", this driver will appear in the installed drivers 
list. 

5.   Close Windows and escape to the DOS prompt. 

6.   Type WIN and press "enter" to go back into Windows.

7.   From the Program Manager screen, double click on the DOS prompt icon 
     in the Main group.

Now you can run your program as you normally would and use Sound Blaster as
your sound card. When you close your program, type EXIT to go back into 
Windows.