TAD-512  (430-0751)        Indicator Summary          Faxback Doc. # 6440

The following information explains the TAD's indicators.

POWER Indicator

Steady:

The TAD is turned on and ready to operate.  The indicator turns on when
you connect the adapter to AC power.

ANSWER Indicator

Steady:

The TAD is ready to receive calls.

Flash:

The TAD is positioning the tape.

Continuous Flash:

The incoming message tape has jammed, broken, or become full while
recording a message.  (Press STOP to turn off the indicator).

Continuous three flashes following eight beeps:

*  The outgoing announcement tape jammed or broke during operation, or
   the incoming message tape broke during rewinding.

*  You pressed ANSWER without loading an outgoing announcement cassette.

*  The outgoing announcement tape has reached the end during recording.

Press STOP to turn off the indicator.

Off:

The TAD is in a mode other than answer-and record or announce-only.

MESSAGE Indicator

One to five flashes with pause between:

The TAD has recorded one to five new incoming messages and they have not
been played back.

Continuous Flash:

The TAD has recorded six or more new incoming messages and they have not
been played back.

Off:

The TAD has recorded no new messages, or all new messages have played to
the end of the last message.

(LB/smc-04/29/94)