Model 22  (160-0414)         Care and Maintenance      Faxback Doc. # 7844

Your Model 22 Hi-Fi Video Cassette Player is an example of superior
design and craftsmanship.  The following suggestions will help you care
for the VCP so you can enjoy it for years.

    Keep the VCP dry.  If it gets wet, wipe it dry immediately.  Liquids
    can contain minerals that corrode the electronic circuits.

    For your VCP's remote control, use only fresh batteries of the
    recommended size and type.  Always remove old batteries.  They can
    leak chemicals that damage electronic circuits.

    Handle the VCP gently and carefully.  Dropping it can damage its
    circuit boards and case and can cause it to work improperly.

    Use and store the VCP only in normal temperature environments.
    Temperature extremes can shorten the life of electronic devices, and
    distort or melt plastic parts.

    Keep the VCP away from dust and dirt, which can cause premature wear
    of parts.

    Wipe the VCP with a damp cloth occasionally to keep it looking new.
    Do not use harsh chemicals, cleaning solvents, or strong detergents to
    clean the VCP.

    Do not spray cleaners or insecticides near the VCP.  Such chemicals
    might damage and discolor the exposed surfaces.

Your VCP has ventilation holes to allow heat to dissipate properly. 
Obstructing these holes or placing your VCP in a confined location can
prevent properly ventilation and cause malfunctions.

SAFETY PRECAUTIONS

Read and follow these tips to avoid shock and fire hazard.

    Do not handle the VCP's power cord with wet hands.

    When you unplug the VCP's power cord, grasp its plug, not the cord.

    If you accidentally spill water on the VCP, immediately unplug the
    power cord and wipe off the VCP.  Then let the VCP dry completely.  If
    necessary, see your local Radio Shack store for service.

    Do not put any object other than a standard VHS video cassette tape
    into the VCP's cassette compartment.

    Do not place anything on top of the VCP.

HANDLING VIDEO CASSETTES

Handle your video cassettes with care to help preserve them and to protect
them from damage.

Place the video cassettes in their protective boxes and store them in a
cool, dry, dust-free environment.  Store the cassettes on end, not on
their sides.  This prevents improper settling of the cassette's spool.

Tape can become wound too tightly around the cassette's spools after
numerous playings.  This can make the cassette improperly load and
automatically eject when you load it.  On most video cassettes there is a
brake-release plunger on the bottom-center of the cassette.  Use the tip
of a pin or pencil to press the plunger.  This loosens the tape.

CLEANING THE VIDEO HEADS

Dirty video heads can cause the playback picture to become blurred even
when the video signal is clear.  Use a special video head cleaning kit
(such as Radio Shack Cat. No. 44-1148) to clean the video heads.

If problems persist, contact your local Radio Shack store for assistance.

Clean the heads only when picture quality if affected.

SERVICING THE VCP

There are no user-serviceable parts inside.  If you have a problem with
the VCP that you cannot correct using this manual and its troubleshooting
guide, take the VCP to your local Radio Shack store for assistance.

FCC WARNING:  Modifying or tampering with your VCP's internal components
              can cause a malfunction and might invalidate its warranty
              and void your FCC authorization to use it.  If you VCP is
              not operating as it should, take it to your local Radio
              Shack store.  Our personnel can assist you and arrange for
              service if needed.

(ALL-10/31/94)